JVC XV-S300BK Service Manual page 15

2.3.5 Removing the spindle motor assembly
(1) Remove the three screws L attaching the spindle motor
on the bottom of the mechanism base.
ATTENTION:
When reattaching, pass the card wire extending from
the spindle motor board through the notch of the spin-
dle base.
(2) Remove the three screws M attaching the spindle base.
(See Fig.2-27 to 2-29)
XV-S300BK/XV-S332SL/XV-S402SL/XV-S403SG
Spindle motor
L
L
Fig.2-27
Spindle motor assembly
Spindle base
Fig.2-28
M
M
Mechanism base
Fig.2-29
L
Spindle base
15