Advertisement
Connect to your electrical supply; the Red indicator lamp will switch on to
show that the appliance is pre heating.
Close the lid while the pre heating occurs. During this time prepare your
waffle/sandwich/food ingredients.
The appliance is ready for use once the green light goes on. This will take
approximately 5 minutes.
Initially, the appliance may release a slight harmless odour. This is a normal
occurrence caused by the initial heating of the heating elements and should
not re-occur.
COOKING
Pour the ingredients as directed in the recipe onto the lower Non Stick Toasting
Plate. Do not overfill.
Close the lid and use the clip to fasten the handles.
During the cooking process the upper lid may bulge slightly.
Never open the lid during the cooking process.
Your food should be ready in approximately 4-5 minutes, or longer to suit your
individual taste requirements.
Open the lid and remove the food using a plastic or wooden spatula.
Never use a metal knife or object as this may damage the Non Stick Coating.
Please note that it is normal for the indicator lamps to switch on and off during
the cooking process.
RECOMMENDATIONS
If you are using the Multi-sandwich maker to cook ready-made waffle/sandwich please
ensure that they fit the Teflon coated plates or cut the waffle/sandwich to fit accordingly.
Use only butter or ordinary margarine when preparing your ready-made waffle/sandwich.
Synthetic or low fat spreads are unsuitable, as they tend to overheat at a lower
temperature forming dark brown deposits that can cause the toasted sandwich to stick to
the Non-stick Coated plates.
Unlike conventional waffles/sandwich, ready-made waffles/sandwich may be buttered on
the outside.
CLEANING AND MAINTENANCE
This appliance is for household use only and is not user-serviceable.
Do not open or change any parts by yourself. Please refer to a qualified electrical
service department or return to the supplier if servicing is necessary.
Always remember to unplug the unit from the electrical outlet when not in use
and before cleaning.
Allow the appliance to cool down before cleaning.
Never immerse the electrical cable, or appliance in water or any other liquid.
Wipe the Non-stick Coated Teflon Plates with a cloth rinsed in hot soapy water.
In order to maintain the polish of the outer surface and Teflon Coated Plates
never use abrasive cleaners to wipe the appliance.
4
Advertisement
