Page 1
GUITAR AMPLIFIER OWNER’S MANUAL Master DESIGNED BY MUSICIANS FOR MUSICIANS...
Page 2
MID-RANGE. Those options allow for additional experimentation with the sound. In case of the Master Classic four power options can be choose: 90W and 40W in STAGE mode and 20W and 12W in STUDIO mode. The Master Classic is designed to work with speakers of 4-8 and 16 ohm impedance.
Page 3
REAR PANEL Master series Guitar Amplifier. SPEAKER MAINS OUT-2 LINE CAUTION! 8-16ohm TO REDUCE THE RISK OF ELECTRIC SHOCK, MASTER TUBE DO NOT REMOVE COVER. DESIGN REFER SERVICING TO QUALIFIED SEND STAGE SERVICE PERSONNEL SPEAKER OUT-1 SERIAL NO: Fuse: 2.5A RET.
Page 4
LINE OUTPUT Line output provides two signals: with and without speaker simulation. You can use speaker simulation (with mono plug) or both of them (with stereo plug). LINE−OUT wire connection Mono jack Stereo jack Ground Fig.A Ground Signal without speaker simulation Signal with speaker simulation Signal with speaker simulation PRECAUTIONS...
Need help?
Do you have a question about the Master Classic and is the answer not in the manual?
Questions and answers