System - Roland XS-82H Reference Manual

Menu List
Value
Sony [NEW]: Power ON power "on"[CR][LF]
Sony [NEW]: Power OFF power "off"[CR][LF]
Sony [NEW]: V-Mute ON blank "on"[CR][LF]
Sony [NEW]: V-Mute OFF blank "off"[CR][LF]
Sony [NEW]: A-Mute ON muting "on"[CR][LF]
Sony [NEW]: A-Mute OFF muting "off"[CR][LF]

SYSTEM

* The settings for the following menu items are not saved at individual presets. Only a single set is saved in the unit. After settings for menu items have
been made, the new values are saved in the unit's internal memory when you exit the menu.
Menu item
2nd level 3rd level
FRAME RATE
—
FIELD SYNC
—
KEY LOCK MODE —
MEMORY PROTECT —
RECALL LOCK —
BEEP —
LCD BACKLIGHT —
DIMMER —
TOP DISPLAY —
START UP —
MONITOR STATUS —
14
Command value
Value
59.94 Hz, 50 Hz
OFF, ON
(ENTER)
OFF, ON
OFF, ON
OFF, ON
0–7
0–7
IN/OUT STATUS, INPUT STATUS1,
INPUT STATUS2, OUTPUT STATUS,
AUDIO VOLUME
LAST MEMORY, PRESET1–32
(ENTER)
This is the new-format Power ON command for Sony projectors.
This is the new-format Power OFF command for Sony projectors.
This is the new-format Video Mute ON command for Sony projectors.
This is the new-format Video Mute OFF command for Sony projectors.
This is the new-format Audio Mute ON command for Sony projectors.
This is the new-format Audio Mute OFF command for Sony projector.
This sets the system clock.
This sets field sync on or off.
Pressing the [VALUE] dial displays the "KEY LOCK MODE" popup. This sets whether key locking is
activated (ON) or deactivated (OFF) for each of the following buttons.
Setting items Value
OFF, ON
CROSSPOINT
OFF, ON
SWITCH MODE
OFF, ON
MENU+EXIT
OFF, ON
CURSOR+VALUE
OFF, ON
CROSS-NOINPUT
OFF, ON
CROSS-OFF
CROSS-OUTPUT1
:
OFF, ON
CROSS-OUTPUT4
* This varies according
to model.
Operation: Turns key lock mode on/off
1.
For "KEY LOCK MODE," set the parameter to "ON" for buttons whose operations you want to
have no effect.
2.
Hold down the [EXIT] button and press and hold the [MENU] button (for 3 seconds or longer).
The message "KEY LOCKED!!" is displayed and the key lock mode is turned on. The buttons you
specified in step 1 are locked.
Again holding down the [EXIT] button and pressing and holding the [MENU] button (for 3
seconds or longer) makes the message "KEY RELEASED!!" appear and turns off the key lock mode.
Setting this to "ON" prohibits saving to presets.
Setting this to "ON" prohibits recalling presets.
This sets the audible beep on or off.
This adjusts the brightness of the display.
* When this is set to "0, " the display's backlight is completely dark.
This adjusts the brightness of the LEDs.
* When this is set to "0, " the LEDs are completely dark.
This sets the top screen displayed at startup.
This sets the settings loaded at startup.
LAST MEMORY:
The last-saved settings are loaded. When "LAST MEMORY" has been selected, settings are saved in
internal memory at the following times.
5 On displaying a menu
5 On exiting a menu
5 When 10 seconds has elapsed since the last operation was performed
Pressing the [VALUE] dial displays the "MONITOR STATUS" popup.
This displays the status of equipment connected to the HDBaseT OUTPUT or HDMI OUTPUT
connectors.
Description
Description
Description
Cross-point selection buttons
[SWITCHING MODE] button
[MENU] button, [EXIT] Button
Cursor buttons, [VALUE] button
Cross-point selection buttons that have no signal input
[OFF] buttons
Cross-point selection buttons for each respective
OUTPUT row