Table of Contents
Advertisement
PowerBoost function
en
Kitchen timer
The kitchen timer operates independently of the
cooking zones and other settings. An audible signal will
sound once the time has elapsed. This function does
not automatically switch off a cooking zone.
Setting procedure
Touch the V symbol.
1.
Touch the time that you want to change. Set the
2.
required time in hours and minutes.
Touch the J symbol
3.
The time starts to elapse.
You can exit this screen by touching the arrow in
Note:
the top left corner of the touchscreen.
Changing, pausing or deleting the time
Switch to the kitchen timer by touching the current time
in the main area.
To change the time, set a new one. Then touch the
J symbol. The kitchen timer will start with the new time.
To pause the time, touch the a symbol. The kitchen
timer is paused.
To delete the time, touch the b symbol. The kitchen
timer is deactivated.
When the time has elapsed
A signal will sound once the time has elapsed.
The display will go out after you touch the kitchen timer.
Stopwatch function
The stopwatch function displays the time that has
elapsed since activation.
This operates independently of the cooking zones and
other settings. This function does not automatically
switch off a cooking zone.
Activating
Touch the þ symbol in the main area.
The time will begin to elapse.
Pausing and deactivating
Switch to the stopwatch function by touching the current
time in the main area.
To pause the time, touch the a symbol. Touch the
J symbol to resume the stopwatch function.
To deactivate the function and reset the time, touch the
b symbol.
You can exit this screen by touching the arrow in
Note:
the top left corner of the touchscreen.
16
vPowerBoost function
This function allows large volumes of water to be
o n
P o w e r B o o s t f u n c t i
heated up even more quickly than with power setting 9.
After 10 minutes, this function will automatically switch
itself off.
This function can always be activated for a cooking
zone, provided the other cooking zone in the same
group is not in use (see illustration).
The function can also be activated when using a
Note:
flexible cooking zone, provided that the entire area is
being used as a single cooking zone.
Activating
Select a cooking zone.
1.
Swipe right on the scale until your finger touches
2.
"Boost". Hold your finger there.
Touch the ï symbol. Lift your finger off.
3.
The function has now been activated.
Advertisement
Table of Contents
