Brookstone FlightForce Manual page 12

4 . Push the THROTTLE CONTROL STICK all the way up . A
beep will sound .
5 . Push the THROTTLE CONTROL STICK all the way
down . A beep will sound and all LED INDICATORS will
change to solid indicating the controller and the HD
Video Drone are successfully synced . If not, repeat
above steps .
FOR MULTI-PERSON PLAY
6 . Before starting, make sure that the power on the
controller is OFF and the battery has been removed from
the HD Video Drone . Make sure that there are no other
2 . 4 Ghz devices in the area .
7 . Each person needs to sync their HD Video Drone at a
different time to avoid interference . Follow steps 1 to 5
above ensuring that no one else is syncing at the same
time .
8 . After syncing, each player's HD Video Drone should be
left ON until all players have synced their HD Video
Drones .
20
9 . Should there be interference, all players must turn off
their controllers and HD Video Drone for up to 60
seconds and then begin the syncing process again .
NOTE: If there is no microSD card inserted in the HD
Video Drone, the REAR UNDERSIDE LEDs will flash.
21