Page 3
9 . Do not carry this unit by charging cable or use cable as a handle . DANGER 10 . Never operate this unit if it has a damaged cable, if it is not working properly, or if it To reduce the risk of electric shock, burns, fire or injury: has been dropped or damaged, or dropped into water .
FCC INFORMATION 9 . For best performance, it is recommended that you operate the drone in zero wind conditions, as wind can greatly affect the performance of the aircraft . Caution: Changes or modifications not expressly approved by the party responsible for 10 .
LI-PO BATTERY WARNING CHARGING THE DRONE'S BATTERY This device contains a Lithium-Polymer battery . The battery must be recycled or disposed The Racing Drone includes a rechargeable Lithium-Polymer battery . Charge the battery of properly . Contact your local waste management office for information on battery before first use .
CONTROLLER SYNCHRONIZE THE DRONE WITH THE CONTROLLER Ensure that the battery has been fully charged (see Page 7) . Insert the battery into the battery compartment on the underside of the drone and plug the battery's charging terminal into the drone . Place the drone on a flat surface .
FLYING YOUR DRONE TRIMMING THE DRONE Use the controller's control sticks to fly your drone . The left control stick controls the To ensure that your drone can fly straight and level, you must trim the aircraft . This can be ascent, descent, left turn and right turn .
AUTOMATIC TRIM FLIGHT TIME Automatic Trim resets the drone to its default settings . Automatic Trim is useful in Your drone's flight time varies depending on a range of factors, such as: situations such as: • The battery charge level •...
ASSEMBLING THE OBSTACLES To assemble the landing pad: Align the tabs in Part 1 (4 pieces) with the slots in the bottom of Part 2 and push to The obstacles are pre-cut on three foam core boards . attach . Before assembling, remove each piece and pop out the foam from the pre-cut slots .
TAKING PICTURES AND VIDEOS VIEWING PICTURES AND VIDEOS NOTE: Pictures are saved on an optional Micro SD card. See Page 17. If you are using the Racing Drone app, you can view pictures and videos taken with the app on your smartphone . If you are not using the app, you can store pictures on a To take pictures or videos with your drone, activate the camera by sliding the Camera Micro SD card, purchased separately, and view them on a computer or other device that Power switch backward, which is the ON position .
If you need additional replacement rotor blades, contact NOTE: To switch between Right Hand and Left Hand mode, tap SETTINGS on the Home Brookstone Customer Service at 800-292-9819 . screen and turn on Right Hand Mode . If you are not receiving a signal, disconnect the drone, restart your WiFi connection, and REPLACING THE DRONE'S COVER repeat the previous steps .
TAKING PICTURES AND VIDEOS WITH THE APP CARE AND MAINTENANCE To take pictures and videos with the WiFi Race Drone app, connect to the app as • Clean with a soft, damp cloth . described on Page 18 . On the top of the screen notice the icons representing a camera •...
ONE (1) YEAR LIMITED WARRANTY suppliers other than Brookstone may provide their own warranties to the purchaser, but Brookstone, in so far as permitted by law, provides these products “as is . ” Brookstone ® warrants this product against defects in materials and/or workmanship...