Assemble Rear Axle And Steering Linkage - Huffy GREEN MACHINE Owner's Manual

Assemble the Rear Axle and Steering Linkage
F
C
G
F
NOTE: Shoulder Screw set (
1. Fold Steering Arms
2. Turn Rear Axle
View .
q
3. Insert each Steering Linkage End
4. Rotate Rear Axle 90° down as shown in View
5. Insert Frame Tube
6. Insert LONG Shoulder Screw
shown.
7. Install Screw
See Torque Chart for recommended torque.
NOTE: Periodically check tightness of Screws
torque.
12
E
B
2
H and I
A
forward as shown with Frame Tube
C
90° UP as shown. Make sure Steering Stop
B
into Steering Housing
H
I into Shoulder Screw
D
1
) are pre-installed. Remove before starting.
E
into Rear Axle Plate
.
w
G
so that mounting holes line up.
down through Rear Axle Plate and Frame Tube as
H . Tighten securely with two allen wrenches.
J . See Torque Chart for recommended
J
H
I
B
pointing back.
D
is on TOP as shown in
F
as shown.
A