JBL DVD600II Service Manual page 23

DVD600II
Troubleshooting DCR600II and DVD600II (Cont'd)
Disc does not play
No picture
Picture is distorted or jumps during
Fast Forward or Reverse Play
Picture jumps or freezes during
normal play
Some remote buttons do not operate
during DVD play
The menu is in a foreign language
" " symbol appears
Picture is displayed in the
wrong aspect ratio
Disc will not copy to VCR
23
• Disc loaded improperly
• Incorrect disc type
• Invalid Region Code
• Rating is above parental preset
• Wrong source for CD was selected
• Intermittent connections
• Wrong input
• Different types of video connections
in use
• MPEG-2 decoding
• Unit may be overheating
• Function not available for this disc
• Incorrect menu language
• Requested function not available at
this time
• Incorrect match of aspect ratio settings
to disc
• Macrovision protection
• Load disc label-side up.
• Check to see that disc is CD, CD-R, CD-RW, DVD-Movie, MP3
or Video CD; other types will not play.
• Use Region 1 disc only.
• Enter password to override or change rating settings.
• If you are playing a CD in the DVD600
you must select the DVD source on the DCR600
not the CD source.
• Check all video connections.
• Check input selection of TV or DCR600
• You may not mix video connection types. If you use S-Video
connections from the DVD600 to the DCR600
II
also use the S-Video input on your television. If you use the
composite video connections from the DVD600
DCR600 , you must also use the composite video input
II
on your television.
• It is a normal artifact of DVD playback for pictures
to jump or show some distortion during rapid play.
• Due to the nature of this product category, DVD players,
while being operated at elevated temperatures, may exhibit
certain anomalies such as picture freeze-ups. If this occurs,
the DVD600 needs to be "reset" by powering it down
II
and up again, using its master On/Off switch. Should this
occur with your DVD600 , first check your discs for any
II
damage, scratches, and fingerprints. If discs are OK, then
ventilation around the DVD600 needs to be increased
II
to ensure proper operation.
• Some discs do not include all DVD features.
• Change menu language selection.
• Certain functions may be disabled during passages
of a disc.
• Change Aspect Ratio settings.
• Most DVDs are encoded with Macrovision
to prevent copying to VCR.
,
II
,
II
.
II
, you must
II
to the
II