Access Point - LG KE590 User Manual

Settings

Access Point

v
View: You can see the selected
profile.
v
Edit: You can edit the selected profile.
v
New access point
• Name: You can type the network
name.
• Bearer: You can set the bearer data
service. Data/GPRS
<Data settings>
Appears only if you select Data Settings
as a Bearer/service.
- Dial-up number: Enter the telephone
number to dial to access your WAP
gateway.
- User ID: The users identity for your
dial-up server (and NOT the WAP
gateway).
- Password: The password required by
your dial-up server (and NOT the WAP
gateway) to identify you.
- Call type: Select the type of data call;
Analogue or Digital (ISDN).
- Call speed: The speed of your data
connection; 9600 or 14400 (Depends
on Operator)
68
(Menu 9.4.2.3)
- Linger time: You need to enter timeout
period. After entering that, the WAP
navigation service will be unavailable if
any data is not input or transferred.
- Primary/Second DNS
<GPRS settings>
The service settings are only available
when GPRS is chosen as a bearer
service.
- APN: Input the APN of the GPRS.
- User ID: The user identity for your
APN server.
- Password: The password required by
your APN server.
- Primary DNS: Input the IP address of
the primary DNS server you access.
- Second DNS: Input the IP address of
the secondary DNS server you access.
v
Delete: Deletes the selected profile
from the list.
v
Reset all: You can reset all the
profiles.