Table of Contents
Advertisement
Your phone provides a number of control
functions that you can use during a call.
To access these functions during a call,
press the left soft key
During a Call
The menu displayed on the handset
screen during a call is different than
the default main menu displayed when
in idle screen, and the options are
described below.
Making a Second Call (Network
Dependent)
You can search and dial the number from
Address Book to make a second call.
Swapping Between Two Calls
To switch between two calls, press
key or the left soft key, and then select
Swap Call.
Answering an Incoming Call
To answer an incoming call when the
handset is ringing, simply press the
key. The handset is also able to warn you
of an incoming call while you are already
on a call. A tone sounds in the earpiece,
and the display will show that a second
call is waiting.
This feature, known as Call waiting, is
only available if your network supports
it. For details of how to activate and
[Options].
deactivate it see Call waiting (Menu
9.5.4).
If Call Waiting is on, you can put the first
call on hold and answer the second, by
pressing the left soft key
Rejecting an Incoming Call
You can reject an incoming call without
answering by simply pressing the key.
During a call, you can reject an incoming
call by pressing the key.
Muting the Microphone
You can mute the microphone during
a call by pressing the [Mute] key. The
handset can be unmuted by pressing the
[Unmute]. When the handset is muted,
the caller cannot hear you, but you can
still hear them.
DTMF tones while calling
To switch on DTMF tones while calling
(e.g. to use the phone with an automatic
switchboard) press the key [Options]
followed by Send DTMF on. Select
DTMF off to disable DTMF tones. DTMF
tones are normally on.
In-call menu
.
27
Advertisement
Table of Contents
