Door Reversibility - Zanussi ZRX51100WA User Manual

Hide thumbs Also See for ZRX51100WA:
Table of Contents

Advertisement

Available languages

Available languages

Ideally, however, the appliance should not
be positioned below overhanging wall units.
Accurate levelling is ensured by one or more
adjustable feet at the base of the cabinet.
It is advisable for there to be 75mm separat-
ing the back of the fridge to the wall, at least
100mm of space at its two sides, height of
over 100mm from its top and a clear space
upfront to allow the doors to open 160°

Door reversibility

WARNING!
Before carrying out any operations,
remove the plug from the power socket.
CAUTION!
To carry out the following operations,
we suggest that this be made with
another
person that will keep a firm hold on the
doors of the appliance during the
operations.
1. Remove the top hinge cover.
2. Unscrew the 2 retaining screws, and
remove the hinge from the appliance.
4
3. Take the door off.
4. Unscrew the two screws fixing the lower
door hinge (there is a foot fixing on the
hinge, do not remove it from the hinge).
Take the door off.
20
1
3
2
1
2
5. Then remove the left foot as shown in the
figure.
6. Fix the door hinge (with the original foot
on it) on the opposite side and then the
loosened foot at the former place as
shown in the figure.
Make sure to place the screws in the right
holes as shown in the figure.The edge of
the hinge is parallel with the side of the
cabinet.
Please make sure to place the lower
foot below the door hinge. The lower
foot is recognizable by its 4 ribs on the
outer surface.
7. Fix the door onto the lower hinge pin.
8. To fit top door hinge, remove the plastic
screw hole cover carefully, and refit them
in the holes left by the hinge retaining
screws.
9. Refit the top hinge using the 2 retaining
screws, making sure that the edge of
the door is parallel with the side of the
cabinet.
10. Replace the hinge cover.
11. Relocate the handle and the plastic plugs
to the opposite side.
1
WARNING!
Reposition, level the appliance, wait for
at least four hours and then connect it
to the power socket.
1
2
3
www.zanussi.com

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Zrx51101wa

Table of Contents