Installation - Zanussi ZRX51100WA User Manual

Closing the door
1. Clean the door gaskets.
2. If necessary, adjust the door. Refer to

"Installation".

Installation
WARNING!
Refer to Safety chapters.
Positioning
This appliance should be installed in a dry,
well ventilated indoor climate where the ambi-
ent temperature corresponds to the climate
class indicated on the rating plate of the
appliance:
Climate
class
SN
N
ST
T
Some functional problems might occur
for some types of models when operat-
ing outside of that range. The correct
operation can only be guaranteed
within the specified temperaturerange.
If you have any doubts regarding where
to install the appliance, please turn to
the vendor, to our customer service or
to the nearest Service Centre
www.zanussi.com
Ambient temperature
+10ºC to +32ºC
+16ºC to +32ºC
+16ºC to +38ºC
+16ºC to +43ºC
3. If necessary, replace the defectivedoor
gaskets. Contact the ServiceCenter.
Location
WARNING!
It must be possible to disconnect the
appliance from the mains power sup-
ply; the plug must therefore be easily
accessible after installation.
The appliance should be installed well away
from sources of heat such as radiators, boil-
ers, direct sunlight etc. Ensure that air can cir-
culate freely around the back of the cabinet.
To ensure best performance, if the appliance
is positioned below an overhanging wall unit,
the minimum distance between the top of
the cabinet and the wall unit must be at least
100 mm.
19