Door Reversibility - Zanussi ZRG15805WA User Manual

45˚
2. Turn counter-clockwise the spacers through
45° until they lock into place.
LEVELLING
When placing the appliance ensure that it stands
level. This can be achieved by two adjustable feet
at the bottom in front.
LOCATION
CAUTION! It must be possible to
disconnect the appliance from the
mains power supply; the plug must
therefore be easily accessible after
installation.
The appliance should be installed well away from
sources of heat such as radiators, boilers, direct
sunlight etc. Ensure that air can circulate freely
around the back of the cabinet. To ensure best
performance, if the appliance is positioned below
an overhanging wall unit, the minimum distance
between the top of the cabinet and the wall unit
must be at least 100 mm . Ideally, however, the
appliance should not be positioned below
overhanging wall units. Accurate levelling is
ensured by one or more adjustable feet at the base
of the cabinet.
100 mm
15 mm
24
A
min.
15 mm

DOOR REVERSIBILITY

WARNING! Before carrying out any
operations, remove the plug from the
power socket.
CAUTION! To carry out the following
operations, we suggest that this be
made with another person that will
keep a firm hold on the doors of the
appliance during the operations.
1. Unscrew both screws on the rear side.
2. Push back the top and lift it.
3. Unscrew the left foot.
4. Unscrew the screws of the door bottom hinge.
Remove the hinge. Put over the pin in the
direction of the arrow.
5. Unscrew and install the screw on the opposite
side.
6. Install the hinge on the opposite side.
7. Screw the right foot.
8. Unscrew the screws of the door top hinge.
9. Remove the hinge. Put over the pin in the
direction of the arrow. Install the hinge on the
opposite side.