Table of Contents
Advertisement
2-5
Boot Menu
The Boot menu allows you to set the drive priority during system boot-up. BIOS setup will display an error
message if the drive(s) specified is not bootable.
Main
Advanced
Boot Configuration
Full Screen LOGO Show
]
Boot Option Priorities
Boot Option #1
Boot Option #2
Network Device BBS Priorities
& Full Screen LOGO Show
Allows you to determine whether to display the GIGABYTE Logo at system startup. Disabled skips the
GIGABYTE Logo when the system starts up. (Default: Enabled)
& Boot Option Priorities
Specifies the overall boot order from the available devices. For example, you can set hard drive as the
first priority (Boot Option #1) and DVD ROM drive as the second priority (Boot Option #2). The list only
displays the device with the highest priority for a specific type. For example, only hard drive defined as the
first priority on the Network Device BBS Priorities submenu will be presented here.
Removable storage devices that support GPT format will be prefixed with "UEFI:" string on the boot device
list. To boot from an operating system that supports GPT partitioning, select the device prefixed with "UEFI:"
string.
Or if you want to install an operating system that supports GPT partitioning such as Windows 7 64-bit, select
the optical drive that contains the Windows 7 64-bit installation disk and is prefixed with "UEFI:" string.
Bios Setup Utility
Chipset
Security
Boot
Save & Exit
[Enabled
[UEFI: Built-in EFI Shell]
[Realtek PXE B01 D00]
- 34 -
gf: Select Screen
hi: Select Item
ENTER: Select
+/-: Change Opt.
F1: General Help
F3: Previous Values
F9: Optimized Defaults
F10: Save & Exit
ESC: Exit
Advertisement
Table of Contents
