Save & Exit Menu; Save Changes And Reset; Discard Changes And Reset; Restore Defaults - Gigabyte GA-H170TN User Manual

2-6 Save & Exit Menu
The Exit menu displays the various options to quit from the BIOS setup. Highlight any of the exit options then
press Enter.
Main Advanced
Save Options

Save Changes and Reset

Discard Changes and Reset

Default Options

Restore Defaults

Boot Override

Realtek PXE B01 D00
UEFI: Built-in EFI Shell
Launch EFI Shell from filesystem device
Me FW Image Re-Flash
& Save Changes and Reset
Active this option to reset system after saving the changes.
Options available: Yes/No.
& Discard Changes and Reset
Active this option to reset system after without saving any changes.
Options available: Yes/No.
& Restore Defaults
Press <Enter> on this item and then press the <Y> key to load the default BIOS settings.
Options available: Yes/No.
& Boot Override
Press Enter to configure the device as the boot-up drive.
& Realtek PXE B01 D00
Allows you to select whether to enable the legacy option ROM for the LAN controller.
& UEFI: Built-in in EFI Shell
Press <Enter> on this item to Launch EFI Shell from filesystem device.
& Launch EFI Shell from filesystem device
Attempts to Launch EFI Shell application (SHell.dfi) from one of the available filesystem devices.
& Me FW Image Re-Flash
Active this option to reflash Firmware.
Bios Setup Utility
Chipset Security Boot Save & Exit
[Disabled]
- 35 -
gf: Select Screen
hi: Select Item
ENTER: Select
+/-: Change Opt.
F1: General Help
F3: Previous Values
F9: Optimized Defaults
F10: Save & Exit
ESC: Exit