Clutch Case - Panasonic EY6931 Service Manual

EY6931
4.1. HOW TO ASSEMBLE DRIVING BLOCK AND GEAR CASE.
Ref. No. 3A
1. Assemble clutch plate, clutch spring and adjust ring to outside of clutch case. 2. The click plate has its own correct direction for proper
3. Assemble vibration spring and cam A into clutch case.
4. When assembling change plates, make sure that protrusion side of change
plates face inside of clutch case.
Ref. No. 3B
Procedure 3A
Procedure 3A → → → → 3B
6
Assembly of driving block.
assembly.
Adjust (A) groove of clutch case to protrusion part of click
plate.
5. Insert spring to driving shaft and assemble them to clutch
case.
Assembly of clutch handle.
1. Set clutch handle B to position 1 toward dent part of clutch
case.
2. Insert 2 pins (Ø2×31.8) by pressing down clutch handle B
and driving shaft.
3. The change ring has its own correct direction. Confirm the
direction when change ring is inserted into clutch handle.
4. Select clutch handle B to
clutch handle A to gear block.
5. Adjust protrusion parts of change plate with groove parts of
change ring inside of clutch handle A.
6. Tighten 3 screws of clutch handle A.
position before assembling