Kenwood KDC-X5100BT Instruction Manual page 32

Table of Contents

Advertisement

Available languages

Available languages

  • ENGLISH, page 6
INSTALLATION/CONNECTION
Wiring connection
Rear/Front/Subwoofer output
For 3-way crossover:
When connecting to
Tweeter/Mid Range/
an external amplifier,
Woofer output
connect its ground wire
to the car's chassis to
avoid damaging the unit.
Connecting the ISO connectors on some VW/Audi or Opel
(Vauxhall) automobiles
You may need to modify the wiring of the supplied wiring harness as
illustrated below.
A7 (Red)
Vehicle
A4 (Yellow)
Default wiring
Pin
Color and function (for ISO connectors)
A4
Yellow
: Battery
Blue/White *
1
A5
: Power control
A7
Red
: Ignition (ACC)
A8
Black
: Earth (ground) connection
Purple ]
B1
: Rear speaker (right)
For 3-way crossover: Tweeter (right)
B2
Purple/black [
B3
Gray ]
: Front speaker (right)
For 3-way crossover: Mid range speaker (right)
Gray/black [
B4
White ]
B5
: Front speaker (left)
For 3-way crossover: Mid range speaker (left)
White/black [
B6
B7
Green ]
: Rear speaker (left)
For 3-way crossover: Tweeter (left)
B8
Green/black [
28
ENGLISH
Antenna terminal
Ignition wire (Red)
Unit
Battery wire (Yellow)
Microphone input jack ( 10)
Fuse (10 A)
Yellow (Battery wire)
Light blue/yellow
Red (Ignition wire)
(Steering remote
control wire)
Red (A7)
Blue/White *
(Power control wire/
Antenna control wire)
Yellow (A4)
Brown
(Mute control wire)
ISO connectors
If your car does not have
an ISO terminal:
USB cable
We recommend installing
(DC 5V
1.5A)
the unit with a commercially
available custom wiring
harness specific for your
car and leave this job to
professionals for your safety.
Auxiliary cable
Consult your car audio dealer.
If no connections are made, do not let the wire come out
from the tab.
STEERING WHEEL
REMOTE INPUT
To the steering wheel
REMOTE CONT
remote control adapter
To the power control terminal when
2
ANT CONT
using the optional power amplifier
P. CONT
or to the antenna control terminal
in the vehicle
To connect the Kenwood
navigation system, refer your
MUTE
navigation manual
NOTE: Total output for Blue/White wire ( *
is 12 V
350 mA.
1
) + ( *
2
)

Advertisement

Table of Contents
loading

Table of Contents