Kenwood KDC-X5100BT Instruction Manual page 22

AUDIO SETTINGS
Crossover settings
Below are the available setting items for 2-way crossover
and 3-way crossover.
SPEAKER SIZE
Selects according to the connected speaker size for
optimum performance.
• The frequency and slope settings are automatically set
for the crossover of the selected speaker.
• When 2-way crossover is selected, if [NONE] is selected
for [TWEETER] of [FRONT], [REAR] and [SUBWOOFER] for
[SPEAKER SIZE], the [X ' OVER] setting of the speaker is not
available.
• When 3-way crossover is selected, if [NONE] is selected
for [WOOFER] of [SPEAKER SIZE], the [X'OVER] setting of
[WOOFER] is not available.
X ' OVER
• [FRQ]/[FRONT-HPF FRQ]/[REAR-HPF FRQ]/[SW LPF FRQ]/
[HPF FRQ]/[LPF FRQ]: Adjusts the crossover frequency for
the selected speakers (high pass filter or low pass filter).
If [THROUGH] is selected, all signals are sent to the
selected speakers.
• [FRONT-HPF SLOPE]/[REAR-HPF SLOPE]/[SW LPF SLOPE]/
[HPF SLOPE]/[LPF SLOPE]/[SLOPE]: Adjusts the crossover
slope.
Selectable only if a setting other than [THROUGH] is
selected for the crossover frequency.
• [SW LPF PHASE]/[PHASE]: Selects the phase of the speaker
output to be in line with the other speaker output.
• [GAIN LEFT]/[GAIN RIGHT]/[FRONT-HPF GAIN]/[REAR-HPF GAIN]/
[SW LPF GAIN]/[GAIN]: Adjusts the output volume of the
selected speaker.
18
ENGLISH
2-way crossover setting items
SPEAKER SIZE
FRONT SIZE
TWEETER
REAR 8CM/10CM/12CM/13CM/16CM/17CM/18CM/4×6/5×7/6×8/6×9/7×10/NONE
(not connected)
SUBWOOFER *
16CM/20CM/25CM/30CM/38CM OVER/NONE (not connected)
X ' OVER
TWEETER FRQ
GAIN LEFT
GAIN RIGHT
FRONT HPF FRONT-HPF FRQ
FRONT-HPF SLOPE
FRONT-HPF GAIN
REAR HPF REAR-HPF FRQ
REAR-HPF SLOPE
REAR-HPF GAIN
SUBWOOFER SW LPF FRQ
LPF *
SW LPF SLOPE
SW LPF PHASE
SW LPF GAIN
* Selectable only when [SUBWOOFER SET] is set to [ON]. ( 17)
8CM/10CM/12CM/13CM/16CM/17CM/18CM/4×6/5×7/6×8/
6×9/7×10
SMALL/MIDDLE/LARGE/NONE (not connected)
1KHZ/1.6KHZ/2.5KHZ/4KHZ/5KHZ/6.3KHZ/8KHZ/10KHZ/
12.5KHZ
–8 to 0
–8 to 0
30HZ/40HZ/50HZ/60HZ/70HZ/80HZ/90HZ/100HZ/120HZ/
150HZ/180HZ/220HZ/250HZ/THROUGH
–6DB/–12DB/–18DB/–24DB
–8 to 0
(Refer FRONT HPF settings above.)
30HZ/40HZ/50HZ/60HZ/70HZ/80HZ/90HZ/100HZ/120HZ/
150HZ/180HZ/220HZ/250HZ/THROUGH
–6DB/–12DB/–18DB/–24DB
REVERSE (180°)/NORMAL (0°)
–8 to 0