Description Of Symbols; Safety Warnings - JET USA RX450 Operating Instructions Manual

Description of symbols

To help recognise this information please observe the following symbols;
Danger
Warning
Electricity Risk
Double Insulated
Electrical safety
WARNING!
When using mains-powered equipment, basic safety precautions, including the
following, should always be followed to reduce risk of fire, electric shock, personal injury and material
damage.
The term "power tool" in all of the warnings refers to your mains-operated (corded) power tool or
battery-operated (cordless) power tool.
General power tool safety warnings
WARNING! Read all safety warnings and all instructions. Failure to follow the warnings and
instructions may result in electric shock, fire and/or serious injury.
1. Work area safety
Keep work area clean and well lit. Cluttered or dark areas invite accidents.
a)
Do not operate power tools in explosive atmospheres, such as in the presence of flammable
b)
liquids, gases or dust. Power tools create sparks which may ignite the dust or fumes.
Keep children and bystanders away while operating a power tool. Distractions can cause
c)
you to lose control.
2. Electrical safety
Power tool plugs must match the outlet. Never modify the plug in any way.
a)
Do not use any adapter plugs with earthed (grounded) power tools.
b)
Unmodified plugs and matching outlets will reduce risk of electric shock.
c)
Avoid body contact with earthed or grounded surfaces, such as pipes, radiators, ranges and
d)
refrigerators. There is an increased risk of electric shock if your body is earthed or grounded.
Do not expose power tools to rain or wet conditions. Water entering a power tool will increase
e)
the risk of electric shock.
Do not abuse the cord. Never use the cord for carrying, pulling or unplugging the power tool.
f)
Keep cord away from heat, oil, sharp edges or moving parts. Damaged or entangled cords
increase the risk of electric shock.
When operating a power tool outdoors, use an extension cord suitable for outdoor use. Use of a
g)
cord suitable for outdoor use reduces the risk of electric shock.
If operating a power tool in a damp location is unavoidable, use a residual current device (RCD)
h)
protected supply. Use of an RCD reduces the risk of electric shock.
3. Personal safety
Stay alert, watch what you are doing and use common sense when operating a power tool. Do
a)
not use a power tool while you are tired or under the influence of drugs, alcohol or medication.
A moment of inattention while operating power tools may result in serious personal injury.
Use personal protective equipment. Always wear eye protection. Protective equipment such as
b)
dust mask, non-skid safety shoes, hard hat, or hearing protection used for appropriate
conditions will reduce personal injuries.
Prevent unintentional starting. Ensure the switch is in the off-position before connecting to
c)
power source and/or battery pack, picking up or carrying the tool. Carrying power tools with
your finger on the switch or energising power tools that have the switch on invites accidents.
Last updated 14/02/2014 Version 1.2
Caution
Note
Machine not suitable for
connection to the potable
water mains.
10 | P a g e