Adding Or Removing Laundry - Miele WTF 130 WPM Operating Instructions Manual

Changing the programme sequence

Adding or removing laundry

You can add or remove items during the
first few minutes after the programme
has started.
 Press the Start/Stop button.
The following will appear in the display:
Cancel programme
 Scroll up the list with the  or 
sensor to:
Add laundry
 Touch the OK sensor.
If this message does not appear in the
display then it is no longer possible to
add items of laundry.
The programme will stop and the door
will unlock.
 Pull open the door.
 Add or remove items.
 Close the door.
 Press the Start/Stop button.
The programme will continue.
Please note:
Once a programme has started suc-
cessfully the washer-dryer cannot re-
cognise any adjustment to the load.
For this reason, if laundry is added or
removed after the start of a programme,
the machine will always complete the
programme cycle assuming a full load.
68

