10 Schematic Diagram
10.1. Schematic Diagram Notes
(All schematic diagrams may be modified at any time with
the development of new technology)
Notes:
S461:
S462:
S463:
S464:
S800:
S801:
S802:
S803:
S804:
S805:
S806:
S807:
S808:
S809:
S810:
S811:
S821:
S822:
• Important safety notice:
Components identified by
tics important for safety.
Furthermore, special parts which have purposes of fire-retar-
dant (resistors), high quality sound (capacitors), low-noise
(resistors), etc are used.
When replacing any of components, be sure to use only
manufacturer's specified parts shown in the parts list.
• Resistor
Unit of resistance is OHM [Ω] (K=1,000, M=1,000,000).
• Capacitor
Unit of capacitance is μF, unless otherwise noted. F=Farads,
pF=pico-Farad.
• Coil
Unit of inductance is H, unless otherwise noted.
*
•
REF IS FOR INDICATION ONLY.
Downloaded from
www.Manualslib.com
DISPLAY switch.
AUTOTUNE switch.
MENU switch.
ENTER switch.
POWER switch (
).
BAND switch.
MEMORY2 switch.
MEMORY4 switch.
MEMORY6 switch.
MEMORY8 switch.
MEMORY10 switch.
MEMORY9 switch.
MEMORY7 switch.
MEMORY1 switch.
MEMORY3 switch.
MEMORY5 switch.
VOLUME switch.
TUNE/SELECT switch
mark have special characteris-
manuals search engine
• Voltage and signal line
: +B Signal Line
35