7.6.
Disassembly of D-AMP P.C.B.
• Refer to "Disassembly of Rear Cabinet Block"
Step 1 : Detach the 8P wire from connector (CN602) on D-
AMP P.C.B..
Step 2 : Desolder the 1P wire at (CK602) on the D-AMP P.C.B..
Step 3 : Desolder the 1P wire at (CK600) on the D-AMP P.C.B..
Step 4 : Desolder the 1P wire at (W25) on the D-AMP P.C.B..
Step 5 : Desolder the 1P wire at (W24A) on the D-AMP P.C.B..
Step 6 : Desolder the 1P wire at (W27) on the D-AMP P.C.B..
Step 7 : Desolder the 2P wire at (P603) on the D-AMP P.C.B..
Step 8 : Desolder the 5P wire at (P606A) on the D-AMP P.C.B..
Downloaded from
www.Manualslib.com
manuals search engine
Step 9 : Remove 2 screws.
Step 10 : Upset the D-AMP P.C.B. as arrow shown.
Step 11 : Detach the 22P FFC from connector (CN601) on the
D-AMP P.C.B..
Step 12 : Remove D-AMP P.C.B..
17