7.7.
Disassembly of Volume P.C.B.
• Refer to "Disassembly of Rear Cabinet Block"
Step 1 : Remove the 2 Rotary Knobs.
Step 2 : Remove 2 screws.
Step 3 : Remove 1 screw.
Step 4 : Detach the 8P wire from connector (CN602) on the D-
AMP P.C.B..
Downloaded from
www.Manualslib.com
manuals search engine
Step 5 : Lift up the Main Chassis Block.
Step 6 : Remove 1 screw.
Step 7 : Release the Volume P.C.B..
18