Self Diagnostic Mode - Panasonic RF-D10EG Service Manual

6 Self Diagnostic Mode

This unit is equipped with features of service mode & doctor mode setting for checking the functions & reliability.
Here is the procedures to enter into Self Diagnostic Mode.
Step 1 : Turn on the unit.
Step 2 : Press [MENU] button and turn the jog [TUNER/SELECT] to the left or right.
Step 3 : Select [SYSTEM] and press [ENTER] button.
Step 4 : Turn the jog [TUNER/SELECT] to select [Factory Reset] and press [ENTER] button.
Step 5 : Press and hold [Preset 2], followed by the sequence to press [DISPLAY]→ [AUTOTUNE]→ [MENU] → [ENTER].
The software version is shown on the display. (The software version shown below is an example. It will be revised when there is an
update)
To exit the Self Diagnostic Mode
• Unplug the AC cord.
11
Downloaded from www.Manualslib.com manuals search engine