ZyXEL Communications wap3205 V3 User Manual page 43

Figure 25 Menu: Client Bridge Mode
The following table describes the sub-menus.
Table 17 Menu: Client Bridge Mode
LINK TAB
Status
Network
AP Select AP Select
WLAN
Information
Advanced
LAN IP
Maintenance
System General
Time Setting
Logs View Log
Tools Firmware
Configuration
Restart
Language
Operation General
Mode
Chapter 4 Modes
FUNCTION
This screen shows the WAP3205 v3's general device, system and interface
status information. Use this screen to access the wizard, and summary
statistics tables.
Use this screen to choose an access point that you want the WAP3205 v3 to
connect to. You should know the security settings of the target AP.
Use this screen to view the SSID and security mode of the AP to which the
WAP3205 v3 is connecting.
This screen allows you to configure advanced wireless settings.
Use this screen to configure LAN IP address and subnet mask.
Use this screen to view and change administrative settings such as system
and domain names, password and inactivity timer.
Use this screen to change your WAP3205 v3's time and date.
Use this screen to view the logs for the categories that you selected.
Use this screen to upload firmware to your WAP3205 v3.
Use this screen to backup and restore the configuration or reset the factory
defaults to your WAP3205 v3.
This screen allows you to reboot the WAP3205 v3 without turning the power
off.
This screen allows you to select the language you prefer.
This screen allows you to select the device operating mode: Access Point,
Universal Repeater or Client Bridge.
WAP3205 v3 User's Guide
43