How To Block Channels - Philips 24PT6341/37 User Manual

A
fter your personal access code has been
set (see previous page), you are now
ready to select the channels you want to
block out or censor.
1
Press the NUMBERED (or CH +, –)
buttons to tune the channel you wish
to block or censor.
2
Press the MENU button on the
remote to show the on-screen menu.
Press the CURSOR UP L or
3
DOWN M button until the word
FEATURES is highlighted.
4
Press the CURSOR RIGHT
ton to display the FEATURES menu
options.
Press the CURSOR UP L or
5
DOWN M button until the words
AutoLock are highlighted.
6
Press the CURSOR RIGHT
ton. "ACCESS CODE" will appear
on the screen.
7
Enter the correct access code num-
ber. "XXXX" shows on the Access
Code display as you press the NUM-
BERED buttons. AutoLock menu
options will be displayed.
Press the CURSOR UP L or
8
M
DOWN buttons until the words
BLOCK CHANNELS are highlight-
ed.
9
Press the CURSOR RIGHT
ton to turn blocking ON or OFF for
that channel. When ON is selected the
channel will be blocked.
Press the CH + or – button to select
10
other channels you wish to block.
Repeat step 9 to block the new chan-
nel.
H
ELPFUL
If you tune to a blocked channel and enter
your Access Code to view the channel, ALL
blocked channels will be viewable until the
TV has been turned off. When the TV is
powered back ON, the previously blocked
channels will be blocked again.
H
OW TO
but-
©
but-
©
NOTE: The 0,7,1,1 access code shown
on this page is the default code or a
way to reset the code when the current
access code is not known.
but-
©
H
INT
B C
LOCK HANNELS
23
Enter your Access Code to
view a tuned channel that is
blocked with Block Channel.