Makita PM7650HG Instruction Manual page 22

1) Draining the solution tank
To clean the solution tank (1), remove the shoulder strap (2) from the hook (3) by
pressing the bottom of the buckle to open it and then taking it off.
Clean the tank inside with water.
And then remove the draining cap (4) to drain the waste water after cleaning.
CAUTION:
• After draining, be sure to attach the strap to the hook.
2) Cleaning the strainer at the top of solution tank
Remove the tank cap, take out the strainer from inside the tank and then clean it
after use.
3)-1 Remove the hose band (5) and the tube (6).
3)-2 Loosen and remove the cap (7) that comes out with the strainer (8).
3)-3 Clear dust and particles with water away from strainer.
3)-4 Put the strainer (8) and the cap (7) back to the original position. Be sure to
tighten the cap firmly.
Push the tube (6) over the strainer (8) as far as the hose band can fully hold it
and then secure it with the hose band (5).
22
(3)
(2)
(6) (5)
(6) (5) (7) (8)
(1)
(4)