Related Manuals for Kramer KWC-1
Summary of Contents for Kramer KWC-1
-
Page 1: User Manual
USER MANUAL MODEL: KWC-1 Wireless Charging Spot P/N: 2900-300504 Rev 4 www.kramerAV.com... -
Page 3: Table Of Contents
Overview Defining the KWC-1 Power Cord Options Installing the KWC-1 Drilling a Hole in the Table Mounting the KWC-1 in the Table Connecting the Cables Using the KWC-1 Using the KWC-1 Wireless Charging Spot Using the Receivers Technical Specifications of the KWC-1... -
Page 4: Introduction
Sierra Video Products; GROUP 12: Digital Signage; GROUP 13: Audio; and GROUP 14: Collaboration. Thank you for purchasing the Kramer KWC-1 Wireless Charging Spot , which is ideal for boardrooms, conference and training rooms or any place where wireless charging is required! -
Page 5: Getting Started
Avoid interference from neighboring electrical appliances that may adversely influence signal quality. • Position your Kramer KWC-1 away from moisture, excessive sunlight and dust. This equipment is to be used only inside a building. It may only be connected to other equipment that is installed inside a building. -
Page 6: Recycling Kramer Products
Kramer Electronics has made arrangements with the European Advanced Recycling Network (EARN) and will cover any costs of treatment, recycling and recovery of waste Kramer Electronics branded equipment on arrival at the EARN facility. For details of Kramer’s recycling arrangements in your particular country go to our recycling pages at www.kramerav.com/support/recycling/. -
Page 7: Overview
Overview KWC-1 (Kramer Wireless Charging) is a built-in table mounted Qi standard compliant charging spot that enables you to charge your mobile device by simply placing it on the charging spot. If your mobile device does not feature wireless charging, you can connect it to one of the receivers included in the package and then place it on the charging spot. -
Page 8: Power Cord Options
For inserting the mounting screw 5V DC Power Connector Connects to the power supply Power Cord Options You can order any of the following power cords to use with a modular KWC-1: Power Cord Type Description 6ft/110V (North America) C-AC/US (110V) -
Page 9: Installing The Kwc-1
The thickness of the table should be 3in (76mm) or less. 2. Clean the table surface. Take care not to damage the table. Kramer Electronics is not responsible for any damage caused to the table. Mounting the KWC-1 in the Table To mount the unit: 1. -
Page 10: Connecting The Cables
KWC-1 (f). Connecting the Cables Connect the KWC-1 to the power supply and the power supply to the mains electricity (the power cord is purchased separately, see Section 3.2). KWC-1 - Installing the KWC-1... -
Page 11: Using The Kwc-1
Using the KWC-1 Figure 2 shows the KWC-1 installed in a table. Figure 2: KWC-1 Boardroom Installation Using the KWC-1 Wireless Charging Spot To use the Wireless Charging Spot: 1. Make sure that the charging spot power cable is connected. -
Page 12: Using The Receivers
Using the Receivers The Kramer KWC-MUSB and KWC-LTN wireless charging receivers (one of each is supplied with the KWC-1) can be used with Kramer Wireless Charging (KWC) products. These receivers are used for mobile devices that DO NOT have a built-in wireless charging receiver. - Page 13 Make sure the receivers are used in a cool and well-ventilated environment and away from flammable and explosive objects. Avoid using the receivers in extreme temperatures or high humidity. KWC-1 - Using the KWC-1...
-
Page 14: Technical Specifications Of The Kwc-1
3.7cm x 5cm x 0.85cm (17.2” x 7.2” x 1.7”) W, D, H WEIGHT: Net: 0.012kg (0.03lb) Gross: 0.032kg (0.07lb) COLORS: KWC-MUSB: light blue KWC-LTN: light green Specifications are subject to change without notice at www.kramerav.com KWC-1 - Technical Specifications of the KWC-1... - Page 16 SAFETY WARNING Disconnect the unit from the power supply before opening and servicing For the latest information on our products and a list of Kramer distributors, visit our Web site where updates to this user manual may be found. We welcome your questions, comments, and feedback.
Need help?
Do you have a question about the KWC-1 and is the answer not in the manual?
Questions and answers