Technicolor COM2000 Integrator's Manual page 81

Below is an explanation of the fields in the lower Control portion of the QAM6 screen shown in
Figure 60:
baseChannel - This field sets the base cable channel number for each of the 3 banks of 4
carriers.
carrierOn - This field allows you to enable or disable individual carriers in the bank of 12.
alternateIp - This field will configure the QAM6 to have a second IP address. This IP address
can be a multicast IP address. However, the QAM6 does not notify a managed switch that it
wants this multicast IP address via IGMP.
tftpIP - This address field sets the address of the file server for SW upgrades.
Base RF channel- Each group
of 4 must be adjacent channels
Sub channel -1, -2...
Port = base + sub
17,18,19...
Bandwidth per
port/subchannel
Total bandwidth per QAM
Total combined bandwidth
QAM6 software version
Total QAM License count
Software upgrade fields
Figure 60 - QAM6 Command Screen
w w w . t e c h n i c o l o r . c o m / m c s
QAM6 IP
Address:
Chassis 1
QAM1
1 activates RF carrier
Alternate IP address
Page 81