Using The Vidplay Feature; Using The Com46 "Simulcrypt" Feature; Figure 34 - Vid Play; Figure 35 - Simulcrypt - Technicolor COM2000 Integrator's Manual

7.14 Using the VidPlay Feature

The VidPlay feature will stream video files from a NAS portable hard drive similar to a Western
Digital My Cloud. Enter the IP:Port information and the name of the files to be played.

7.15 Using the COM46 "Simulcrypt" Feature

The information shown in Figure 35 below describes how to enable the use of the COM46 with a
Simulcrypt compliant encryption system such as Samsung's LYNK© DRM system.
 SimulcryptIP - This is the IP address of the Simulcrypt (LYNK© as of April 2014) server. In
LYNK enabled systems this IP address will point to the COM46 card that has been configured
as the key server for the system or to the external LYNK key server provided by the distributor.
 Port - This is the IP port of the server that will be looking for requests from the COM46 for
exchanging encryption information.
 ChassisBitmap - This bit field can be used to allow an external LYNK key server to send
EMMs to multiple chassis. A one would be set for each chassis address to be supplied with key
messages. E.g. if a system has two chassis, configured as chassis 1 and 3, the 'ChassisBitmap'
field would be set to 0xa.

Figure 34 - Vid Play

Figure 35 - Simulcrypt

w w w . t e c h n i c o l o r . c o m / m c s Page 51