Using The Water Dispenser; Filling The Water Dispenser's Tank - Beko CN161230DX User Manual

5 Using your appliance

5.17. Using the water dispenser

*optional
C
It is normal for the first few glasses of
water taken from the dispenser to be
warm.
C
If the water dispenser is not used for a long
period of time, dispose of first few glasses
of water to obtain fresh water.
1. Push in the lever of the water dispenser with
your glass. If you are using a soft plastic cup,
pushing the lever with your hand will be easier.
2. After filling the cup up to the level you want,
release the lever.
C
Please note, how much water flows from
the dispenser depends on how far you
depress the lever. As the level of water in
your cup / glass rises, gently reduce the
amount of pressure on the lever to avoid
overflow. If you slightly press the arm, the
water will drip; this is quite normal and not
a failure.
Refrigerator / User manual
5.18. Filling the water dispenser's
tank
Water tank filling reservoir is located inside the
door rack.
1. Open the cover of the tank.
2. Fill the tank with fresh drinking water.
3. Close the cover.
C
Do not fill the water tank with any other
liquid except for water such as fruit
juices, carbonated beverages or alcoholic
drinks which are not suitable to use in
the water dispenser. Water dispenser will
be irreparably damaged if these kinds of
liquids are used. Warranty does not cover
such usages. Some chemical substances
and additives contained in these kinds of
drinks/liquids may damage the water tank.
C
Use clean drinking water only.
23 /34 EN