Menu Option: Display; Menu Option: Anthem Room Correction; Menu Option: Power Settings - Paradigm SOUNDPLAY Owner's Manual

MENU OPTION: DISPLAY

Display: Enter the submenu by pressing the
enter button. The settings in this menu allow
you to adjust the brightness of the display and
configure the display to automatically turn on
and off.
Display > Bright: This option configures the
soundbar's display to be on at full brightness
when the soundbar is on. Activate by pressing
the enter button and the soundbar will respond
with 'Saved'.
Display > Dim: This option configures the
soundbar's display to be on at a reduced
brightness when the soundbar is on. Activate
by pressing the enter button and the soundbar
will respond with 'Saved'.
Display > Auto Bright (Default): This option
configures the soundbar's display to be on at
full brightness when a setting (such as volume
or input) is changed. After a few seconds, the
display will turn off. Activate by pressing the
enter button and the soundbar will respond
with 'Saved'.
Display > Auto Dim: This option configures
the soundbar's display to be on at a reduced
brightness when a setting (such as volume
or input) is changed. After a few seconds the
display will turn off. Activate by pressing the
enter button and the soundbar will respond
with 'Saved'.
MENU: ANTHEM ROOM CORRECTION
Anthem Room Correction: Enter the submenu
by pressing the enter button. Here you may
turn Anthem Room Correction on and off. Using
proprietary processes, a microphone, and the
power of your PC, the ARC system analyzes
21
your soundbar's in-room sound, then computes
the required correction to yield optimal perfor-
mance within your acoustic environment.
Anthem Room Correction > Off or On: This
option turns the Anthem Room Correction
feature on or off. Activate by pressing the enter
button and the soundbar will respond with
'Saved'. Please note, turning ARC on and off
only makes a difference if ARC corrections have
not been loaded on the soundbar.

MENU OPTION: POWER SETTINGS

Power Settings: Enter the submenu by press-
ing the enter button. Here you may adjust the
soundbar's power options.
Power Settings > Power Standby: Enter the
submenu by pressing the enter button. Here
you choose whether the subwoofer is always on
or turns itself on and off automatically.
Power Settings > Power Standby > Auto
Standby (Default): This option configures the
soundbar to turn itself off after no audio signal
is detected for approximately 20 minutes. When
the soundbar detects an audio signal, it will
immediately turn itself on. Activate by pressing
the enter button and the soundbar will respond
with 'Saved'. Please note: When set to Auto
Standby, if the soundbar is manually turned off
(using the power button on the control panel or
remote control), the soundbar will not respond
to an incoming audio signal and will not turn on
automatically. In this situation, turn the sound-
bar on using the power button on the control
panel or remote control and the soundbar will
resume automatic power handling.
Power Settings > Power Standby > Always On:
This option configures the soundbar to remain on
at all times until it is manually turned off using