Table of Contents
Advertisement
Unpack the Refrigerator
Remove the Packaging
• Remove tape and glue residue from surfaces before
turning on the refrigerator. Rub a small amount of liquid
dish soap over the adhesive with your fingers. Wipe
with warm water and dry.
NOTE: Do not use sharp instruments, rubbing alcohol,
flammable fluids, or abrasive cleaners to remove tape
or glue. These products can damage the surface of your
refrigerator. For more information, see "Refrigerator
Safety."
• Dispose of/recycle all packaging materials.
iMPorTANT: Do not remove the white foam air return
insert that is located behind the control panel on the ceiling
of the refrigerator (on some models). The insert is part of
the refrigerator and not part of the packing material. If the
insert is removed, ice may migrate down from the freezer
and cause icicles to form.
When Moving Your Refrigerator:
Your refrigerator is heavy. When moving the refrigerator
for cleaning or service, be sure to cover the floor with
cardboard or hardboard to avoid floor damage. Always
pull the refrigerator straight out when moving it. Do not
wiggle or "walk" the refrigerator when trying to move it,
as floor damage could occur.
INSTALLATION INSTRUCTIONS
WARNING
Excessive Weight Hazard
Use two or more people to move and install refrigerator.
Failure to do so can result in back or other injury.
Clean Before Using
• After you remove all of the package materials, clean
the inside of your refrigerator before using it. See the
cleaning instructions in "Refrigerator Care."
Important information to know about glass shelves
and covers:
Do not clean glass shelves or covers with warm water
when they are cold. Shelves and covers may break if
exposed to sudden temperature changes or impact, such
as bumping. Tempered glass is designed to shatter into
many small, pebble-size pieces. This is normal. Glass
shelves and covers are heavy. Use both hands when
removing them to avoid dropping.
7
Hide quick links:
Advertisement
Table of Contents
