Silvercrest SWV 300 C1 User Manual And Service Information page 188

SilverCrest SWV 300 C1
Insert the wifi range extender into a socket that is always easily accessible.
Then switch on the wifi range extender by turning the main switch (10) to the "ON" position. The wifi
range extender requires a certain amount of time (boot time) after it is switched on before it is ready to
use. After switching the device on, wait for approximately 30 seconds before using the wifi range
extender.
There are two different ways to configure the wifi range extender. If your wireless router supports WPS,
you can use this simple function to easily set up the wifi range extender. If you would like to use a
wireless router without WPS, you must connect the wifi range extender to your computer via a network
cable and configure it.
186 - English