Silvercrest SWV 300 C1 User Manual And Service Information page 190

SilverCrest SWV 300 C1
(Symbolic representation, connection button (WPS) can be differently arranged and referred to
depending on the router model.)
The wifi range extender then automatically connects to your wireless router and applies all of the
settings. Once the connection has been successfully established, the field strength indicator (1) displays
the signal strength. You can then use the wifi range extender where your end device is to be connected
wirelessly with your router.
Connect the wifi range extender to your end device. Use the network cable included with the device for
this purpose. Insert one end of the network cable into the WAN/LAN socket (6) or the LAN socket (7)
of the wifi range extender and the other end into the LAN socket of your end device. Insert the wifi
range extender only into a socket that is easily accessible.
If your wireless router does not support WPS or the connection fails for some other reason, you must
manually configure the wifi range extender.
188 - English