Dust Cup; Structure; Disassembly And Assembly Of Dust Cup - Toshiba VC-GC32BSA Owner's Manual

Dust Cup

1. Structure

Separation
chamber
Dust cup
The back
Air vent

2. Disassembly and assembly of dust cup

① Press the removing button
to disassemble the dust cup
as shown in figure.
Removing button
141114c1_VC-GC32BSA.indb 19
Cup button
Max. line
The dust should not
exceed the Max. line
to avoid suction
declining because of
stacking.
The bottom
Air inlet
Cleaning brush
② Press the dust cup down
until the "click " sound is
heard.
Dust cleaning
slider
Slide it right and left
to clean the dust
attached on the pleat
filter.
Separation net
Dust cup
Do not disassemble the dust
cup if the unit is in an up-right
position to avoid dust spilling
from air inlet.
click
Cup cover
Pleat filter
Do install the pleat
filter properly to
avoid motor
smoking or fire.
Rubber sealing
ring
Do not jerk or
disassemble the
rubber sealing ring.
19
2014/11/14 16:11:43