Toshiba ER-GD400HK Instruction Manual page 13

Navigation Knob and Illumination Guide
（The back of KNOB and START key is illuminated.）
Notified the cooking mode, status and completion by illumination.
●
When the KNOB is
Rotated
Pressed
●
The START button
※1
BUTTON MENU
・When pressing the key, auto menu list 4~10
will appear.
・Time and temperature selection is uncertain.
(page 30~33)
MANUAL COOKING BUTTON
・Time and temperature selection can be
adjusted depending on the menu.
(page 38~50)
MENU & SETTING KNOB
（Dial Menu /Time/Temperature/Adjusting the finish）
Auto menu is adjusted by rotated the knob to preset the time , temperature , finish etc. and the select can be confirmed by pressing
the key.
※2
DIAL MENU
・By rotates the knob , It show at menu list 11~40
・is used when selecting on door menu (11~37) and cleaning (38~40)
TIME
・ For setting the manual cooking time as well as increase or decrease the time during cooking.Increases on turning right and
decreases on turning left.
TEMPERATURE
・For setting the temperature for manual cooking (Superheated Steam/Convection/Proper Temperature Steam).
・For changing the temperature during manual cooking (Superheated Steam/Convection/Proper Temperature Steam).
ADJUSTING THE FINISH
・For adjusting the finish during auto menu. [Increases] in strength on turning right and [decreases] in strength on turnung left.
: Blue
: Red
: In the end setting.
CANCEL BUTTON
・For cancel or stop cooking program.
START HEATING BUTTON
・On pressing this button, menu list 1~3 will appear
・For reheating rice and dish.
(Page 25~27)
※Cooking will start when the button is pressed.
・Used for confirm to Start/Restart process in
Button menu (4~10), Dial Menu (11~40).
13