Monitor Cctv Camera; Unlock; Intercommunication; Talk Volume Adjustment - X2 Digital Wireless Systems X2-VIDEO-201 User Manual

Operation

4.2 Monitor CCTV Camera

(Optional)
Under standby mode, touch and hold
CCTV1/CCTV2/CCTV1 when you repeatedly touch the button.
Note: 1. Refer to Operation 9.5 for CCTV surveillance period.
2. Under monitor mode, the icon indicates to take photo,
The function is invalid.

5.Unlock

When the room station is talking with door station, touch
(Refer to Operation 9.4 for unlock time.)

6.Intercommunication

When monitor A wants to call monitor B, touch and hold
number (repeatedly touch or /
Touch to exit if call failure.
Note: When you see the room number on the screen after touching
next step, or the unit will go back to the standby mode automatically.
12
to monitor CCTV1. The monitoring channel would be
icon indicates to review picture.
to open the door.
and the screen will display the room
to choose monitor B number), then touch
, you only have 10secs to operate the

7.Talk Volume Adjustment

During talk, touch
adjustment.

8.Extension Switch

Under standby mode, touch and hold
meanwhile mute LED
is triggered. The switch will be automatically turned off after the
setting time.
Note: 1. You need to connect with an external device to achieve the extension switch function.
2. Refer to Operation 9.6 for extension switch time.

9.Function Setup

Under the main menu interface, touch
to call.
function setup interface.
to adjust the talk volume and save automatically, which has 9 levels of
until the unit sounds "DI",
flashes, it means the extension switch
/ to choose FUNCTION, then touch
SET
AWAY
MUTE SET
Storage Help KEY SOUND
OPEN TIME
TIME
CCTV
AUX. TIME
OFF
Operation
Outer device
E705FC/E706FC-T-W100
POWER
to enter into
OFF
OFF
ON
3S
MANUAL
3S
ON
13