Room Number Setup; Ringtone Setup - X2 Digital Wireless Systems X2-VIDEO-201 User Manual

X2 video 2-wire room station 7" color tft
Table of Contents

Advertisement

Operation
st
Calling from 1 door (the outdoor unit)
When you turn on the pedal control for talk mode
1. When the system connects with 2pcs door station, under standby mode, step on the pedal control
switch to monitor Door 1. Step again to monitor Door 2. Step it third time and the room station
will enter into standby mode.
2.When the system only connects with 1pc door station, under standby mode, step on the pedal
control switch to monitor door station, step again the room station and will enter into standby mode.
3.When door station rings, step on the pedal control switch to talk, step again to stop talk and go back
to standby mode.

10.2 Room Number Setup

Under system setup interface, choose ROOM NO., touch
room number between 2/3/4.
18
nd
Calling from 2 door (equipped with the calling device)
to confirm, then you are able to setup
Storage
Help
Note: Please make sure every room has its own room number to avoid confliction.

10.3 Ringtone Setup

Under system setup interface, choose MUSIC SET, touch
ringtone/ringing volume/ringing time.
Storage
Help
A. Ringtone
Ringtone for Door1/Door 2: Under Music Set interface, choose MUSIC CH1 or MUSIC CH2, and
touch
to confirm, then you are able to choose your favorite ringtones.
Operation
2ND / PEDAL CTRL
2ND
ROOM NO. SET
2
MUSIC
SET
TIME
20XX/01/01 01:00
RESET
LANGUAGE
ENGLISH
2
3
4
to confirm, then you are able to setup
2ND / PEDAL CTRL
2ND
ROOM NO. SET
1
MUSIC
SET
TIME
20XX/01/01 01:00
RESET
LANGUAGE
ENGLISH
19

Advertisement

Table of Contents
loading

This manual is also suitable for:

X2-video-200

Table of Contents