HIMS candy5 hd II User Manual page 41

7-6. The image is too dark or too bright
 Press the Zoom In button while holding the Freeze
button to control the brightness of the screen. There are
4 levels of brightness. The higher the level, the brighter
the screen.
The image may also be too dark if the LED is turned

off. You may turn on the LED by pressing the Zoom
Out button while holding the Freeze button
7-7. LCD screen turns off suddenly
 CANDY5 HD Ⅱ goes into Power Saving Mode when
it has not been used for over 2 minutes. Move
CANDY5 HD Ⅱ or press any button to deactivate
Power Saving Mode. If CANDY5 HD Ⅱ remains
inactive for more than 3 minutes, power is shut
completely off and you must power the unit on
before using it again.
 If the battery is totally discharged, the unit powers off.
Connect the power adaptor to the DC Jack and
41
CANDY5 HD User Manual