Bluetooth Connection Instructions; Precautions; General Sequence For Bluetooth Connections; Bluetooth Dongle - Pioneer STEP-5e User Manual

STEP-5e User Manual

7 Bluetooth Connection Instructions

7.1 Precautions

To connect the printer with another device via Bluetooth, the devices must be within 10m of one
another. The connection is broken if the distance between devices exceeds 10m.
The maximum separating distance may be shortened if transmission obstacles, such as cement walls,
are present.
If a device (such as a microwave oven, wireless LAN, etc.) that uses the same frequency is present,
transmission may be interrupted. Separate the printer and Bluetooth-enabled device from such
interrupting devices by a distance of at least 5m.

7.2 General Sequence for Bluetooth Connections

Bluetooth connection methods vary by device. The following is the general sequence for Bluetooth
connections, provided for reference purposes.
1) Turn on power of each device - PDAs, PCs (Bluetooth Dongle), Printers, etc.
2) Run a Bluetooth connection program on the PDA or PC.
3) Search for the peripheral with which to establish the connection - Search for the printer.
4) Register this Printer form the search results - If a security setting is enabled, register after
entering the PIN Code. (PIN Code=Pass Key: password of the Bluetooth device, Default code:
0000) You can check the Bluetooth pairing password through self-inspection by printed page
view.
5) Test the connection - When connected, confirm the designated COM port of fixed COM port and
print.

7.3 Bluetooth Dongle

1. After purchasing Bluetooth Dongle.
2. Turn on the printer.
3. Connect Bluetooth Dongle to the USB port of the PC.
4. After that the Bluetooth icon will show at the lower right of the screen.
5. Right Click the icon, choose "Add Device".
Page 25