Roper REL3422AW0 Use And Care Manual page 14

Automatic cycle and a temperature selector (3 settings)
Cycle control k:ob
Temperhre selector
St&t button
If your dryer has an automatic cycle and a suggests heat settings for various types of
Temperature Selector with 3 temperature loads. See page 10 for additional information.
settings (high, medium, low), refer to the chart
below and the chart on page 8 for cycle
NOTE: To help reduce wrinkling, remove the
information.
load from the dryer as soon as tumbling stops.
Loads tumble without heat during the last few
This is important for permanent press, knits
minutes of all heated cycles. This makes a load
and synthetic fabrics. Do not overdry. Over-
easier to handle and helps keep wrinkles from
drying can cause shrinkage, static cling, and
setting in.
damage some fabrics.
Uslng the automatic cycle
Use the automatic cycle and a heat setting to
automatically dry any load. The chart below
TYPE OF LOAD
COlTONS AND LINENS
Extra Heavy-Bedspreads, mattress pads, quilts
Heavyweight-Towels, jeans, corduroys, work clothes
Mediumweight-Sheets, cotton underwear, diapers
Lightweight-Batistes, organdies, lingerie
PERMANENT PRESS, SYNTHETICS AND BLENDS
Heavyweight-Work clothes, jackets, raincoats
Mediumweight-Shirts, play clothes, sheets, slacks
Lightweight-Lingerie, blouses, dresses
KNITS
Heavyweight-Cottons, rayons, blends, T-shirts, slacks,
shirts
Mediumweight-Synthetics (polyester, acrylic, etc.), dress
slacks, skirts, sweaters
Lightweight-Synthetics (polyester, acrylic, etc.) and
blends, lingerie, blouses, dresses
DELICATE FABRICS
Sheer curtains (2 or 3 panels), gauze, lace, etc.
CYCLE AND TEMPERATURE
Automatic cycle
HIGH
HIGH
MED
LOW
HIGH
MED
LOW
HIGH
MED
LOW
LOW
14