Table of Contents
Advertisement
10.
RS-232 Control Protocol ________________________________________________ 32
10.1
Hardware Specifications __________________________________________________ 32
Serial Port Specifications _________________________________________________________________ 32
Serial Data Word Descriptions ____________________________________________________________ 32
Command / Message Block Structure ______________________________________________________ 32
Status and Data Replies __________________________________________________________________ 33
10.2
Command List ___________________________________________________________ 33
Operation Mode _______________________________________________________________________ 33
Matte Settings _________________________________________________________________________ 33
Matte Control _________________________________________________________________________ 34
Matte Color Tolerance ___________________________________________________________________ 34
Matte Luminance Tolerance ______________________________________________________________ 35
Spill Color Correction ___________________________________________________________________ 35
Edge Correction ________________________________________________________________________ 35
Garbage Mask _________________________________________________________________________ 36
Post Correction ________________________________________________________________________ 36
Save/Load Preset _______________________________________________________________________ 37
Input Configuration _____________________________________________________________________ 37
Outputs Configuration __________________________________________________________________ 38
Discover ______________________________________________________________________________ 38
Get __________________________________________________________________________________ 40
11.
Specifications ________________________________________________________ 43
Service & Support __________________________________________________________ 44
Disclaimer of Product and Services
The information offered in this instruction manual is intended as a guide only. At all times, Datavideo
Technologies will try to give correct, complete and suitable information. However, Datavideo Technologies
cannot exclude that some information in this manual, from time to time, may not be correct or may be
incomplete. This manual may contain typing errors, omissions or incorrect information. Datavideo Technologies
always recommend that you double check the information in this document for accuracy before making any
purchase decision or using the product. Datavideo Technologies is not responsible for any omissions or errors,
or for any subsequent loss or damage caused by using the information contained within this manual. Further
advice on the content of this manual or on the product can be obtained by contacting your local Datavideo
Office or
dealer.
2
Advertisement
Table of Contents
