Table of Contents
Advertisement
The window for changing network parameters
6.3 Change the Device Name
It is recommended that each time you connect the device and after assigning an IP address to
the device, the following steps are carried out to change the name of the device.
• Open the DVK-300HD Chroma Key application
• Select a device from the list of available devices.
• Select the Configuration button located at the bottom right of the main window
• Select the Change button in the Device info
Section setting the device name
• Set the device name and accept the setting via the Save button
The window for changing the name of the device
6.4 Auto Setting Save Function
An important feature in the firmware version 2.3 and the utility program version 1.3 or later
is to allow the device to automatically save the last change of settings by the user after 15
seconds of every settings change. However, if the utility program is closed or the device is
shut down within 15 seconds of the last change, the last settings will be lost.
12
Advertisement
Table of Contents
