7.5 Additional Correction to Improve Quality
The Edge brightness function is used to correct semi-transparent areas (e.g. hair ends that
need to be darkened or brightened) in order to make an object look natural.
A view before an Edge brightness adjustment
7.6 Limitation of the Mask Area
Garbage mask is used to reduce the mask size by cutting it (in all of the possible directions:
left, right, up, down).
This function is used if the view of the keyed background is not large enough to fill in the
entire object shot.
The Edge brightness slider
A view after an Edge brightness adjustment
The Garbage mask section
19