Yamaha MW10 Service Manual page 36

MW10
Recording and Playback
1. Click the Transport panel [Record] button
to begin recording.
When recording is started the project cursor will
begin moving to the right and a box that displays
the recording results will be created.
Transport panel
Rewind
Forward
2. Confirm the signal is input.
3. When you have few seconds recording the
track, click the Transport panel [Stop]
button.
4. To hear playback of the track you have just
recorded, use either the Transport panel
[Rewind] button or the ruler to rewind to
the beginning of the recorded section, then
click the Transport panel [Play] button.
The playback level will be displayed via the master
section level meter on the right side of the Mixer
window. The channel strip level meters will become
active when you turn the channel strip [Record
Enable] button off.
36
[Note]
When a pair of headphones are plugged into the MW10
PHONES jack, you can adjust the headphone listening
level via the MW10 C-R/PHONES control and the 2TR IN/
USB control.
* Make it to MAX at the inspection (When Playback).
Record
Play
Stop
5.
Recording results
To save the project file select [Save] from
the [File] menu and enter a file name before
actually saving the file.