Yamaha MW10 Service Manual page 27

MASTER control
●
RETURN to ST level control
2TR IN/USB level control
2TR IN/USB switch
C-R/PHONES level control
ST Master VR
Others
●
PHANTOM switch
3.2 Indicator Inspection
Check if the POWER LED will light when the unit is turned on.
3.3 Gain
In the state 3.1, the output levels shall be within the range specified in the Table 3.3-1 - 3.3-6.
Table 3.3-1 CH INPUT(1,2) [dBu]
INPUT INPUT
Level
q
Mic -72
-28
Line -46
*1 Measure with the PAN control set at the center position. For others, turn the PAN control counterclockwise
fully for the ST L and turn it clockwise fully for the ST R.
*2 Measure with the AUX level control set at the POST(turn the AUX level control counterclockwise fully)
position.
* The difference in the level between channels shall be 2dB or less.
Table 3.3-2 [dBu]
INPUT INPUT Level
Mic 1,2
CH INSERT IN 1
CH INSERT IN 2
Table 3.3-3 Input Terminal STEREO IN [dBu]
INPUT INPUT CH INPUT Level
Mic
w
e
PHONE JACK 3,5L
r
4,6R
*1 Measure with the PAN control set at the center position. For others, turn the PAN control counterclockwise
fully for the ST L and turn it clockwise fully for the ST R.
*2 Measure with the AUX level control set at the POST(turn the AUX level control counterclockwise fully)
position.
* The difference in the level between channels shall be 2dB or less.
Table 3.3-4 Input Terminal STEREO IN [dBu]
INPUT INPUT CH
t
PHONE JACK 7L,9L
y
8R,10R
u
PIN JACK 7L,9L
i
8R,10R
*2 Measure with the AUX level control set at the POST(turn the AUX level control counterclockwise fully
position.)
Gain ST L OUT
Max 0 +/-2 *1
*1
Min +1 +/-2
*1
Max 0 +/-2
Gain INSERT OUT
-72 Max
0 Unspecified
0 Unspecified
Gain
-72 Max
-28 Min
-46 Max
INPUT Level ST L OUT
-22 +4 +/-2
--
+4 +/-2
--
: MAX
: MIN
: OFF (TO ST)
: MAX
: MAX
: OFF
ST R OUT AUX1
0 +/-2 *1 -1 +/-2
--
--
REC OUT L
1,2
-12 +/-2 --
-- +4.2 +/-2
-- +4.2 +/-2
ST L OUT ST R OUT AUX1
*1 *1
0 +/-2 0 +/-2 +1 +/-2
+1 +/-2 *1 --
*1
+1 +/-2 -- +1 +/-2
-- +1 +/-2 *1 -5 +/-2
ST R OUT AUX1
-- -2 +/-2
+4 +/-2
--
+4 +/-2
AUX2 C-R OUT L C-R OUT R
+5 +/-2 *2 +16 +/-2 *1 +16 +/-2
-- --
-- --
REC OUT R
--
+4.2 +/-2
--
AUX2
*2
+7 +/-2
--
*2
+7 +/-2
+1 +/-2 *2
AUX2
+4 +/-2 *2
MW10
*1
--
--
27