Inserting The Battery; Battery Cautions - Remington PG025AU Use & Care Manual

INSERTING THE BATTERY

Your Remington® Groomer runs on one "AA" Alkaline battery (Included).
• To open the battery compartment, turn the base of the unit approximately
1cm to the left and pull it off.
• Insert the "AA" battery into the unit, positive end first.
• Replace the base and turn it 1cm to the right to lock it into place.

BATTERY CAUTIONS

• Use of non-alkaline batteries will impair the unit's operating performance.
• The battery should not be left in the unit if the unit is not in use for long
periods.
• To prevent battery corrosion, the unit should be stored in a dry environment.
• Dead batteries should be removed immediately and disposed of properly.
• Do not use rechargeable batteries with this appliance. The lower voltage in
rechargeable batteries impairs the performance of the cutting unit.
CHANGING THE ATTACHMENT HEADS
This model comes with interchangeable attachments. You may want to use the
detail trimmer & comb for your beard, moustache, neckline & sideburns and the
rotary trimmer can be used for nose and ear hair grooming.
To change heads:
• Turn the groomer off.
• Detach cutting head by pressing the head release button located above the
ON/OFF switch, and gently pulling the attachment head off.
• Once the previous head is removed, attach the other head by placing it on top
of the unit and gently pushing it down to the locked position.
• Turning on your groomer: Use the intuitive ON/OFF switch to turn your
groomer on and off.
Note: Always remember to turn on the groomer before you insert it into your
nose or ear to avoid painfully snagging hairs.
4