Keypad Settings - Vacon NXI User Manual

control keypad
Multimonitoring items (P6.5.4)
Vacon alphanumeric keypad features a display where you can monitor up to three actual values at
the same time (see Chapter 7.3.1 and Chapter
are using). On page P6.5.4 of the System Menu, you can define whether the operator can replace the
values monitored with other values. See below.
READY
I/Oterm
Multimon. items
ChangeEnable
Figure 7-13. Disabling the change of multimonitoring items
7.3.6.6

Keypad settings

In the Keypad settings submenu under the System menu, you can further customise your inverter
.
operator interface
Locate the Keypad setting submenu (S6.6). Under the submenu, there are four pages (P#)
associated with the keypad operation:
Keypad settings
Figure 7-14. Keypad settings submenu
Default page (P6.6.1)
Here you can set the location (page) to which the display automatically moves when the
time
(see below) has expired or the power is switched on to the keypad.
Default page
If the is 0, the function is not activated i.e. the latest displayed page remains on the
keypad display. Pressing
Main menu with the
right
. If the page you want to move to by default is at the third level, repeat the procedure. Confirm
the new default page with the
Menu button left
pressing
READY
I/Oterm
Default page
0.
Figure 7-15. Default page function
24-hour support: +358-(0)40-8371 150 • Email: vacon@vacon.com
I/Oterm
Multimon. items
ChangeEnable
READY
I/Oterm

P1 P5
Menu button right
Browser buttons
. To edit the number of the submenu/page, press
enter .
button
.
READY
I/Oterm
Default page
0.
Monitoring values
in the manual of the application you
READY
READY
I/Oterm
Default page
0.
takes you to the edit mode. Change the number of the
You can return to the previous menu at any time by
READY
I/Oterm
Default page
1.
vacon • 87
READY
I/Oterm
Multimon. items
enter
ChangeDisable
Timeout
Menu button
enter
CONFIRM CHANGE
REPEAT TO SET
DEFAULT SUBMENU/PAGE
CANCEL
7